Tools Needed:

  • Tape Measure
  • Level
  • Drill & Drill Bits
  • Masking Tape
  • Silicone Adhesive

Installation of Stud & Pin Mounted Letters


Hang The Template
Use the painter's tape to hang the template.  Use small pieces at the corners and along the edge of the template to hold it to your mounting surface.

Level
Use a level to put your mounting template straight on the surface and tape in place. This is a great time to stand back and double check the spelling, spacing and alignment

Marking
Use a center punch or nail to mark the stud placement on the mounting surface.  Punch your marks straight through the template.  Once everything is marked remove the tape and SAVE THE TEMPLATE.


Drilling
Drill all the holes that where marked on the wall.slightly smaller than the stud or pin size on your letters.

Mounting Letters and Logo
Apply a small drop of adhesive to each stud or pin in the back of your first letter. Align the letter with the mounting holes you drilled and firmly push the letter in. Repeat this for the remaining letters and logo

Do It Yourself Instructions

If you need us to take care of installing your project, please ask.  We are happy to manage your project and reach out to our national network of installers